Description
PRODUCT DESCRIPTION
SikaBond®-T100 is a one component, zero VOC,
permanently elastic, super strong, very low
permeability, moisture-cure, all-in-one hybrid
polyurethane adhesive that offers unlimited moisture
protection, crack bridging and sound reduction for full
surface wood floor bonding.
USES
SikaBond®-T100 may be used for solid and engineered
wood floors (strips, longstrips, planks, panels, boards),
mosaic parquet, industrial parquet, wood paving
(residential) as well as chip boards and plywood. Once
cured, SikaBond®-T100 will generate a super strong
bond to a variety of substrates for glue down
installations and at the same time form a membrane
which reduces moisture vapor transmission from the
subfloor and sound reduction membrane.
CHARACTERISTICS / ADVANTAGES
▪ 150% Elongation
▪ Bonds up to 3/4″ solid and engineered wood
▪ Cleans off prefinished floors before and after cure
▪ Unlimited subfloor moisture vapor protection
No moisture testing required – a dry to touch substrate
is the only requirement
▪
▪ ZERO VOC
▪ Contains no water, solvent or isocyanates
▪ Low moisture vapor permeability
Sound protection – meets local IIC and STC
requirements
▪
▪ Crack Bridging
▪ Very easy to spread
▪ Low odor
▪ Advanced Hybrid Technology
▪ Excellent green grab
▪ High elongation
Permanently elastic – allows planks to expand and
contract without damage to the adhesive
▪
▪ Tenacious Bonding
▪ Passes USGBC LEED Version 4
ENVIRONMENTAL INFORMATION
LEED EQc 4.1
( 100 g/L limit )
SCAQMD, Rule 1168
( 100 g/L limit )
passes passes
BAAQMD, Reg. 8, Rule 51
( 120 g/L limit )
LEED v4
( < 0.5 mg/m3 )
passes passes
APPROVALS / STANDARDS
Independently tested to – STC 62 (ASTM E-90) and IIC =
67 (ASTM E-492) when used as a sound control
membrane at the specified coverage.
PRODUCT INFORMATION
Chemical Base Hybrid Polymer
Packaging 4 gal. (15.14 L)
Color Off – white
Shelf Life 12 months from date of production if stored in undamaged original sealed
containers
Storage Conditions Keep in dry conditions and protected from direct sunlight at temperatures
between 50 °F and 77 °F (10–25 °C)
Density 1.64 kg/L
Water Vapor Permeability is < 4 g/mmHg, 24h, m2 according to ASTM E96 (< 4 Perms)
Consistency Easy to spread
TECHNICAL INFORMATION
Shore A Hardness 45–50 (7 days at 74 °F (24 °C) and 50 % R.H.)
Tensile Strength 150 psi (1.03 MPa) (7 days at 74 °F (24 °C) and 50 % R.H.)
Elongation at Break 150 % (7 days at 74 °F (24 °C) and 50 % R.H.)
Shear Strength 2.0 N/mm², 1 mm adhesive thickness (74 °F (24 °C) and 50 % R.H.)
Service Temperature -40–150 °F (-40–65 °C)
